Desktop PCB Router machine Features:
1. Desktop single table cutting machine, the speed of up to 100mm /
s, positioning speed 500mm / s.
2. High-quality shaft system allows the system to quickly increase
and decrease, reduce the same period of time, improve productivity,
while maintaining high accuracy.
3. Use high-quality hardware to ensure high rigidity and high
4. All leadscrews are covered to prevent dust and dirt from
entering, improving the life and performance of the shaft.
5. To avoid the artificial flap caused by the crack and parts
damage and other issues.
6. Avoid the use of punch or fold, the mechanical stress generated
by the problem.
7. Suitable for cutting of finished arc and wire.
8. Suitable for small multi-pull cutting, such as mobile phone
substrate, PDA, PC interface card.
2. Technical parameters
1. Drive system motor: stepper motor
2. Spindle speed: 60000r / m
3. Cutting performance: 500mm / s
4. Drive system repeatability: ± 0.02mm
5. Cutting speed: maximum 100mm / s depends on the circuit board
material and cutting quality
6. Resolution: ± 0.01mm
7. Configuration: X, Y, Z three-axis, travel: 400X400X100mm, travel
can also be customized.
8. Repeatability: <0.1mm, for contours of lines and curves
9. Board positioning: special or standard fixture
10. loading and unloading methods: manual way
11. Board thickness: 0.4mm-4mm
12. Safety settings: machine emergency stop switch, spindle
emergency stop switch, spindle motor overheat and servo motor
13. Spindle motor:
Power: 0.3 kW
Maximum speed: 60000 r / min
Cooling method: air-cooled
14. Machine size: 760 * 620 * 700mm
15. Weight: 85KG
16.CCD and monitor optional
17. Programming: keypad input teaching
18. Data storage capacity: 100-200 group of documents
19. Control: microcomputer control, online programming, CAD file
20. Transmission: rail + screw (Taiwan)
21. Vacuum cleaner: 1.5KW, 220V; Size: 710 * 390 * 680mm; 24 hours
22. Vacuum way: under the vacuum
23. Safety measures: equipped with protective cover