Digital Industrial Welding Solder Fume Extractor with Warning
|Air Infelt Interface:||75mm|
Less than 55dB
|Machine Control:||Digital display and remote control|
|Application:||Solder fume removal and purify system|
Waterun Fume Purifying and Filtering System is for cleaning of both
particles and gases. It is designed to filter the harmfu
substances, such as hydrocarbon and cyanide, during the process of
soldering, tin dipping in the solder pot, laser marking and
carving, printing, etc. It catches harmful smoke with freestanding
ducts and adjustabl air volume to significantly improve your
1) Pre-Filter: the large-size pad filter can filter large particles
2) Middle Filter: it filters the bigger powders for prolonging the
main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas
filter. The HEPA cleans the gas and powders filtering from the
pre-filter and then carry them to the gas filter. which with the
carbon and other chemical combination, filters off the deleterious
substance and then outputs the clean air.
1,Integrated body design, structured with metal framework and
processed with electrostatic spraying for premium cold-rolled steel
sheet, is corrosion-resistant, environment-friendly and durable.
2,Four-stage purification design: filtering step by step enables
harmful smoke to be better purified. Even for objects at least 8
times smaller than PM2.5, the purification rate can reach up to
3,This product has the 1.4m universal smoke suction arm, which can
be positioned and oriented arbitrarily (its length may be regulated
according to customer requirements, without the support of external
force). (A patent application has been filed.)
4,Adopt DC brushless motor that has stable performance and long
service life. Low noise, high efficiency, low energy consumption,
zero maintenance and zero consumable.
5,CE and PONY certified, safe and reliable.
Waterun Technology Co.,Ltd manufacturing a variety of high quality
air purification systems for filter the harmful substances. Our
line of floor, bench top, mounted and portable units serve a
variety of applications including welding, soldering,
manufacturing, laboratory and pharmaceutical operations.Don’t
despair if you don’t see your application listed below! Our modular
product line can be configured in a number of different ways to
address your specific requirements.
soldering fume extractor
laser cutting, laser engraving and marking
welding, laser welding
medical, moxibustion, moxa-moxibustion
beauty fume extraction
Pharmaceutical and laboratories, chemical
Compared with the products from foreign countries, our products in
terms of the effect is almost the same, but the majority of our
products are less than USD2000, so our products are cost-effective,
and the use of more affordable cost. The products from abroad
mainly purify the viruses and bacteria as the main direction of
governance. In China not only to purify viruses, bacteria, but also
clean harmful smoke pollution. WHO estimates that there are over
200 million people deaths each year due to inhalation of indoor and
outdoor air pollution in small particles.
1. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2)
energy saving (3) easy installation, flexible remove (4) low cost
(5) reduce the incidence of diseases and major diseases, and health
is priceless (6) to reduce unpleasant smell (7) to reduce dust and
other harmful substances, and so on.
2. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000
hours, consider environmental factors. Usually it can use 4-5 years
without any problems.
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we
suggest not more than 1.5meter. For multi-station, the total pipe
length should not exceed 10 meters.
4. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
5. How long need to to replace the pre-filter, middle filter and the
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.
6. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent
7. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100%
of poison gas, but you can make a different filter net rate upon